• Breaking News

    Sunday, August 22, 2021

    GPU Mining Trigger this sub with one sentence

    GPU Mining Trigger this sub with one sentence


    Trigger this sub with one sentence

    Posted: 21 Aug 2021 11:56 PM PDT

    First budget rig coming together. Got the second 1050ti running and 3d printed some hardware to mount everything. Thinking of two 1660ti to finish.

    Posted: 21 Aug 2021 06:33 PM PDT

    Can you use NVIDIA Tesla GPUs to mine crypto?

    Posted: 22 Aug 2021 07:55 AM PDT

    I plan to start mining cryptocurrency, but not without spending 10,000+ dollars. If I were using a mining rig that supports 6 GPUs, could I use 5 Tesla cards and 1 other card with display connections to mine crypto?

    submitted by /u/AdmiralArchie1
    [link] [comments]

    My mining setup before I move to my new apartment

    Posted: 22 Aug 2021 04:38 AM PDT

    https://imgur.com/gallery/oXk5c0B

    Still looking to add 3 or 4 more gpu's into it. I hit a bad silicone lottery on that 590, literally cant overclock it at all. I've tried to flash bios and all sorts of other shit and I just cant seem to get it past 25 without crashing or being unstable. Thinking about selling it and just going all RTX 20 and 30 series.

    Good vibes :)

    submitted by /u/NorthernOakTree
    [link] [comments]

    Will this work with a B450 Mobo. I already have 6 Cards on the motherboard, can I use this to have 7 cards mining? The Motherboard is MSI B450 Gaming Plus Max or B450 Asrock B450 Pro 4. The cards are 3070s

    Posted: 22 Aug 2021 08:14 AM PDT

    MSI B550 gaming plus, many questions

    Posted: 22 Aug 2021 08:09 AM PDT

    Currently I am using a B550 gaming plus Motherboard. Unfortunately, I must use wifi so this leaves me with 3 pcie slots. So far I was able to connect and run two 3080 and one 480 on those.

    They are working fine with cgminer but trex doesn't see the AMD card. Any idea?

    More importantly I have another 3080 that is currently running in a separate computer and that I would like to put on the rig so I bought a M2 to pcie adapter, unfortunately when I connect a card to it nothing happens. Do I need to do anything beyond connecting it to the board? Any magic bios settings?

    On a separate note, I have 2 more cards incoming so I ordered a 1 to 4 pcie adapter. Are these ok or should I buy another mobo?

    (I am running Windows 10)

    submitted by /u/cure-4-pain
    [link] [comments]

    PC going to sleep when turning off new monitor

    Posted: 22 Aug 2021 07:53 AM PDT

    Hey guys. Having a weird issue: just bought a Samsung Odyssey G5.

    I have two cards mining in my gaming PC. Never had any issues before, when going to sleep just turned the monitors off, and that was it.

    Since I got the Odyssey G5 (3 days ago), when turning the monitor off it just puts the PC in sleep mode, GPUs turn off, and that's it - monitor doesn't come back from sleep easily, too.

    Not sure if that could be related to DP 1.4, or anything like that, as I didn't have any issues with turning off the monitor before...

    Did anybody face this issue? Thanks!

    submitted by /u/LukeFalknor
    [link] [comments]

    Is Palit really a good quality brand, as in Asus/EVGA level competition?

    Posted: 22 Aug 2021 06:55 AM PDT

    Some palit 1660s popped up for ~500 bucks on local stores. Yeah this price is very abusive but it's the cheapest i've seen in my country for the past year or so, and there are other brands in the market but they're over 600 dollars. I've also read on another reddit post that apparently it's the biggest graphics card manufacturer in the world? Can someone vouch for it? I've only ever used EVGA and Asus cards.

    Edit: I tried to look up their market share and company size but all that shows up are other known western brands

    submitted by /u/CandyCanePapa
    [link] [comments]

    Need Help - Dual GPU setup on old motherboard. Rig will not boot into desktop. BSOD.

    Posted: 22 Aug 2021 12:05 AM PDT

    I bought an old rig with the intention of turning it into a dual GPU miner.

    Motherboard: Gigabyte: GA-870A-UD3

    PSU: Aresgame ATG1000 - 1000 watts modular

    CPU: AMD Phenom 2 - 945

    GPU1: Asus TUF 6800 XT - installed on PCIE-x16

    GPU2: Asus TUF 6800 - installed on PCIE-x4

    RAM: 4GB 1333MHZ

    OS: Windows 10 (Legacy Boot - not UEFI)

    Each GPUs is powered with 2 dedicated 8-pin connections- (4 separate PCIE cables / not 2 split into 4)

    Almost done, but ran into some issues.

    When I power on the PC - I get a rainbow screen instead of the usual Gigabyte bootup screen with boot menu and bios access. After the rainbow screen, it continues to try and boot into windows but will turn into a BSOD. PC restarts. process repeats.

    GPU driver and Radeon software is installed.

    I pull out GPU1 and leave GPU2 installed on PCIE-x4. Power on. Rainbow startup screen, but boots to desktop, GPU is detected and works as expected.

    I pull out GPU2 and leave GPU1 installed on PCIE-x16. Power on. Rainbow startup screen, but boots to desktop. GPU is detected and works as expected.

    So if both GPUs work as expected when installed separately on their respective slots, why does rig not boot to desktop when they are installed together? Do I need an HDMI dummy plug?

    Should I be concerned about the rainbow screen?

    Seeking enlightenment with the intention of passing on knowledge to whoever needs it. Any guidance would be greatly appreciated.

    Thanks much!

    submitted by /u/Wonderous_Soul
    [link] [comments]

    My 6800XT acting like it should for about a second...then back to 58 mhs ����‍♂️

    Posted: 21 Aug 2021 05:01 PM PDT

    2nd Rig up and Mining 6-1660 Supers off my gaming PC took me about 3 hours to put together (1st-Rig 6-3070 and mining in my other PC w/ 1-3070)

    Posted: 21 Aug 2021 09:36 AM PDT

    ASRock RX 6800 XT VBIOS....Does anyone knows if this bio is for hashrate improvement?

    Posted: 21 Aug 2021 08:28 PM PDT

    got some time, so tuning Polaris GPUs for maximum efficiency and not MHs.... RVN and ETC

    Posted: 21 Aug 2021 10:27 AM PDT

    got some time, so tuning Polaris GPUs for maximum efficiency and not MHs.... RVN and ETC

    got some time today so I cleaned the cards and try to lower the volts as much I can and phoenix miner helped by showing KH/J.

    at the end lot of watts lowered so are few MH's. I'm keeping at current configs because electric is expensive here.

    cards on ETC took the best jump from 420 KH/J to 485 KH/J with the drop of 4 to 5 MHs.

    Cards on RVN went from 1050 watts to 950 watts at the wall with the drop of 4 MHs.

    this also shows how much software shows and what you actual use at the wall.

    pictures for anyone want to replicate.

    https://preview.redd.it/5is3dxsnwqi71.jpg?width=1215&format=pjpg&auto=webp&s=5d2c5e4701cd3c97d0a9734fa31693a85d71f377

    https://preview.redd.it/ub8ssvsnwqi71.jpg?width=1067&format=pjpg&auto=webp&s=5a108008cf17721f2a142da1da1152fb211a48ce

    https://preview.redd.it/qx7nz5tnwqi71.jpg?width=2551&format=pjpg&auto=webp&s=51037045d9440fbd47d693ad5bff6f2e3939cb1a

    https://preview.redd.it/iee22ysnwqi71.jpg?width=1216&format=pjpg&auto=webp&s=39bee4effd99233ee889a65c4f0b6522e88767b0

    https://preview.redd.it/5529r6tnwqi71.jpg?width=1955&format=pjpg&auto=webp&s=04a0a0ffd0cdabac4f51d02b546532bf1579b04b

    submitted by /u/atifsh
    [link] [comments]

    I just switched from Phoenix to Trex

    Posted: 21 Aug 2021 09:10 AM PDT

    I really wanted Phoenix miner to be my mining software, i used it since the start.

    It just keeps closing, stopping, or some error..its always something.

    The latest version from bitcointalk is running, etc etc.

    All my cards are Nvidia GPUs and i see Trex works well with them

    After switching, i immediately saw a 3mhs increase, went from an average of 158 to 162 just by switching software.

    All my temps dropped over 5° each card.

    Lets hope trex doesnt need as much attention as phoenix did.

    My software stack:

    • Trex (replaced phoenix this morning)

    • MSI Afterburner

    • Windows 10

    • Teamviewer

    submitted by /u/yabezuno
    [link] [comments]

    What indicators are there for whether a 2080 SUPER is LHR or not?

    Posted: 21 Aug 2021 06:21 PM PDT

    Debating buying a card right now but I can't see any way to know if it's LHR? Also, is 1200 CAD a good price or is that marked up?
    Thanks!

    submitted by /u/robbhope
    [link] [comments]

    UPDATED gpu not registering on pc, need help removing my cards from pc, looking for ideas before I try my best.

    Posted: 21 Aug 2021 09:26 AM PDT

    Added on a x11 from parallel miner and lost a GPU

    Posted: 21 Aug 2021 09:16 AM PDT

    I have a mining system with these specs..

    3) EVGA 1080ti 1) 5500xt 1) EVGA 2070 1) 650w PSU (System supply) 1) 1000x Corsair rm1000x (graphics cards only) 1) HP 750w (with x11)

    When I move any graphics card over to the X11 it powers on but doesn't show in windows, but if I put it back onto the 1000w PSU it works flawlessly. I bought the x11 with a 750w to even out the load across two power supplies but for some reason can't get it working. I can only assume that it's not in sync with the other graphics card or cannot mix between power supplies.

    Any help is appreciated, thanks in advanced. And the X11 powers on with the system VIA molex plug from the 650w system power supply.

    submitted by /u/ohageek
    [link] [comments]

    Thanks for being the 2nd reason behind us not getting gpus

    Posted: 21 Aug 2021 09:34 AM PDT

    No comments:

    Post a Comment