GPU Mining If any of you are mining ERG, or mine it from time to time, please consider picking any other pool than Nanopool. One pool having over 50% of the hash power can be detrimental to network security.

If any of you are mining ERG, or mine it from time to time, please consider picking any other pool than Nanopool. One pool having over 50% of the hash power can be detrimental to network security.
It’s a mess right now but it’s a start
4 month gpu mining journey
How safe is my power config?
Two $25 Shoe Rack 2.0 Progress
Which parts of the GPU core are used by mining algorithms?
Rig trips breaker even when power consumption low
Wat is ROI
If you want to run an air-cooled Radeon VII at a "water-cooled only" hashrate, you've got to get creative. 1 twisty-tie and 2 pieces of scotch-tape holds the cardboard vent structure together. Anything is possible w/ ductless AC
Sourcing molex power cables
Why not use unmineable.com. ?? Used them for Doge, now I’ve got a better GPU (FTX 1660 ti). Are the speeds slower or something?
Can I use VGA cables from a 750W EVGA G5 Gold Series for my EVGA 1300w G2?
Bought two VGA cables to power 3090 off amazon, this is what I got...

If any of you are mining ERG, or mine it from time to time, please consider picking any other pool than Nanopool. One pool having over 50% of the hash power can be detrimental to network security.

Posted: 10 Aug 2021 08:02 PM PDT

submitted by /u/PulseQ8
[link] [comments]

It’s a mess right now but it’s a start

Posted: 10 Aug 2021 10:43 AM PDT

submitted by /u/PugLord219
[link] [comments]

4 month gpu mining journey

Posted: 10 Aug 2021 07:01 PM PDT

submitted by /u/blazin-asian
[link] [comments]

How safe is my power config?

Posted: 11 Aug 2021 08:46 AM PDT

I am running a 4x 3060Ti rig with all GPU set at 140W Power limit in Hive OS. I am using same pcie connector to power GPU and riser. I am not able to get new pcie connectors for my PSU now. Though I have configured a PL of 140W which is less than rated 150W for PCIE connectors. I am not exactly sure how much I should trust the Power consumption reported by Hive OS. I have also heard that though 150W is the rated value, it can go till 280W theoretically. How risky is my configuration? Are there any alternatives that I can pursue provided getting new PCIE connectors is going to be a challenge.

submitted by /u/machan91
[link] [comments]

Two $25 Shoe Rack 2.0 Progress

Posted: 10 Aug 2021 05:08 PM PDT

submitted by /u/MinerFortyNine
[link] [comments]

Which parts of the GPU core are used by mining algorithms?

Posted: 10 Aug 2021 07:16 PM PDT

Which parts of the GPU core are used by mining algorithms? Are the unified shaders the only parts used? Or do mining algos also use the texture mapping units and render output units?

submitted by /u/Zeeblackbaron
[link] [comments]

Rig trips breaker even when power consumption low

Posted: 11 Aug 2021 06:55 AM PDT

I've been mining on minerstat windows for about a week now and I've been running into this problem where my rig crashes. I have it connected to a power strip with a breaker and the breaker is always tripped when I go to restart it. The rig pulls just over 1000w, around 1020 usually. Despite this not being enough to overdraw my psu, I for some reason still trips the breaker. I've messed around a lot with the oc settings, but I don't think reducing the power draw further would do anything since it's already well below the limit of the psu.

From what I understand, a breaker trips when more power is being drawn than it can supply. I'm drawing about 65% of my psu's limit, so by my understanding, there should be no way for the rig to be over drawing. Any info would be very helpful!

Info about my rig: 8x 6700xt 4gb ram Intel Celeron 2.4gh 1600w psu

OC settings: Core clock: 1300 Core voltage: 700 Memory clock: 2150 Memory voltage: 750 Fan speed: 80%

submitted by /u/Gavolak
[link] [comments]

Wat is ROI

Posted: 10 Aug 2021 10:00 PM PDT

submitted by /u/wallabrush99
[link] [comments]

If you want to run an air-cooled Radeon VII at a "water-cooled only" hashrate, you've got to get creative. 1 twisty-tie and 2 pieces of scotch-tape holds the cardboard vent structure together. Anything is possible w/ ductless AC

Posted: 10 Aug 2021 06:14 PM PDT